Mgshv technical characteristics. Explanation of marking mgshv

Antipyretics for children are prescribed by a pediatrician. But there are situations of emergency care for fever, when the child needs to give the medicine immediately. Then the parents take responsibility and apply antipyretic drugs. What is allowed to give to infants? How can you bring down the temperature in older children? Which medications are the safest?

Our company supplies wire MGSHV wholesale and retail throughout Russia. The sale is made from the availability, from the closest warehouse to you, or under the order for production. You can leave a request in any convenient way: on the site, send by e-mail or order feedback from the manager. In the shortest time, he will prepare for you a profitable commercial offer, possible discounts and will select the optimal delivery conditions.

Wire MGSHV price per meter:

   The cost of production is calculated individually, based on the volume, conditions of the order. To find out the final price, you need to leave a request.

Explanation of the MGSHV wire:

M - Installation wire
D - Flexible (stranded wire)
Ш - The vein is covered with silk polyester yarns
B - PVC insulation

Elements of wire construction MGSHV:

Low-voltage installation wire with copper tin-plated conductive high-class residential flexibility class 4 or 5, combined fibrous and PVC insulation.

Operating conditions of the MGSHV wire:

The wire is intended for intra-block and interblock connections of electrical devices and equipment.
Type of climatic performance
The wire is resistant to vibration, shock and linear loads, as well as to acoustic noise.
The wire is designed for operation in the temperature range from minus 50 to 70 ° C.
The wire is resistant to relative humidity of air up to 98% at a temperature of up to 35 ° C, lowered to 133 micropaels (1 micrometer Hg) for 24 hours and increased to 295 kPa (3 kgf / cm2) atmospheric pressure, mold fungi, static and dynamic dust, salt fog, solar radiation, atmospheric precipitation, gasoline, mineral oil and salt water.
The wire corresponds to TU 16-505.437-82.

Technical characteristics of the MGSHV wire:

The wire is available in 7 colors: white or natural, yellow or orange, red or pink, blue or blue, green brown, black or purple.
The electrical resistance of the core at a length of 1 km corresponds to GOST 22483-77.
Test lead voltage:
- sections of 0.08-0.14 mm2 with a frequency of up to 10 kHz - up to 380 V;
- sections of 0.20-1.5 mm2 with a frequency up to 10 kHz - up to 1000 V;
- sections of 0.08-0.14mm2 with a frequency of up to 50kHz - 800V;
- sections of 0.20-1.5 mm2 with a frequency of up to 50 kHz - 2000 V.
Electrical insulation resistance of 1 m wire, MOhm - not less than 20000.
The wire does not spread the combustion in a single laying.
The 95% resource is 15,000 hours.
Service life - not less than 15 years.

Cable manufacturers MGSHV:

  • Kazenergocabel
  • Camcable
  • Podolskkabel
  • Pskovcable
  • Syccable
  • Uralkabel

* Manufacture factories can not manufacture all mark-sizes / cable modifications.

IMSS

Normative document: TU 16-505.437-82

Elements of construction:

  1. The conductor is twisted from copper tinned wires;
  2. Isolation of polyester yarns;
  3. PVC insulation, color insulation: white, natural, yellow, orange, red, pink, blue, blue, green, brown, black, purple.

Note: at the request of consumers, the wires can be supplied with the number of cores from 2 to 5.

Characteristics

Humidity at 35 ° C [%]

Pulse voltage [V]

Test alternating voltage of frequency 50 Hz, 5 min. [kV]

Maximum operating temperature of the conductor [° С]

Operating alternating voltage with a frequency of 10 kHz [V]

Operating constant voltage [V]

Construction length, not less than [m]

Ambient temperature, upper limit [° C]

Ambient temperature, lower limit [° C]

Electrical insulation resistance, not less than [MΩ * km]

Application area:

The wires of MGSHV brand are intended for mobile and fixed installation of intra-block, inter-unit, intra-device and inter-instrument connections in electronic and electrical devices, as well as the output ends of electrical equipment for working alternating voltage of 1000 V with a frequency of 10 kHz and a constant voltage of 1500 V.

The wires are designed for operation on land and at sea in all macro-climatic regions, except for the macroclimatic region with a very cold climate. The wires are resistant to sinusoidal vibration in the frequency range from 1 to 5000 Hz with an acceleration amplitude of 400 m / s 2, a single-action mechanical shock with a peak shock acceleration of 10,000 m / s 2, an impact shock duration of 0.1-2.0 ms, mechanical impact of multiple action with a peak shock acceleration of 1500 m / s 2 duration of impact acceleration 1-5 ms, linear acceleration of 5000 m / s 2 and acoustic noise in the frequency range 50-10 000 Hz at a sound pressure level (relative to 2/105 Pa ) 170dB. The wires are resistant to low atmospheric pressure to 1.33x10-4 Pa for 24 hours and increased atmospheric pressure to 295 kPa. The wires are resistant to atmospheric condensed precipitation (dew and frost), static and dynamic dust (sand), salt (sea) fog, mold fungi and solar radiation. Wires do not spread the combustion in a single laying. The wires are exposed to short-term exposure to temperatures: 100 ° C for 96 hours, 130 ° C for 5 minutes, 150 ° C for 10 minutes (without further use).

The minimum operating time is 10,000 hours. The minimum lifetime of the wires is 15 years. 95% of the resource is 15,000 hours.


Cross-section of veins,
   mm2

Number and diameter
   wires in the vein,
   pcs x mm.

Weight of wire,
   kg / km

Outside diameter
   not more than, mm

Resistance
   conductor at 20 ° C,
   not more than Ohm / km

MGSHV TU 16-505.437-82. In stock all the colors.
  The wire of MGSHV brand consists of an electrically conductive vein, twisted from copper tinned thin wires.
  Surface of the core is covered with insulation from polyester threads (silk), then it is poured with PVC plastic insulation.
  Isolation of PVC wire MGSHV is made by plants in various colors - Red, Orange, Yellow, Green, Blue, Blue, Purple, Brown, White, Black.

Impulse voltage up to 700V.
  Operating alternating voltage of frequency 10 kHz -1000V
  Working constant voltage -1000V

Mounting wire MGSHV is operated on land and in the sea, the wire is resistant to impact in all climatic regions, except for the climatic region with a very cold climate.
  Operating temperature range - from -50 to +70.
  The MGSHV wire does not spread combustion with a single gasket, it has a fire safety certificate.

Name unit of measurement Price with VAT for unit (rub) Estimated mass of 1 km of wire, kg The maximum outer diameter of the wire, mm Production
from 1-799m from 800-2999m from 3000m
  MGSHV 0.12 1 meter 2.62 2.46 2.3 2,5 1,3 Russia
  MGSHV 0.14 1 meter 2.87 2.7 2.52 2,7 1,4 Russia
  MGSHV 0.2 1 meter 3.64 3.41 3.19 4,3 1,6 Russia
  MGSHV 0.35 1 meter 4.74 4.45 4.16 5,6 1,6 Russia
  MGSHV 0.5 1 meter 5.79 5.44 5.08 7,8 2,2 Russia
  MGSHV 0.75 1 meter 7.39 6.93 6.48 10,4 2,5 Russia
  MGSHV 1.0 1 meter 9.22 8.66 8.09 13,9 2,8 Russia
  MGSHV 1.5 1 meter 13.58 12.74 11.91 18,6 3 Russia

MGSVV wire is flexible mounting wire   with combined insulation.

MGSHV wire consists of twisted conductors (tinned copper wire), insulation from polyester (silk) thread and insulation sheath (PVC plastic). In the wire MGSHV there is one vein, made in the form of a bundle. The use of copper wires provides high flexibility of the wire and the possibility of its use in mobile installation.

Thanks to polyester braiding, the wire has good strength characteristics, while maintaining flexibility. Therefore, the wire MGSHB can be used in the conditions of frequent bends, without loss of reliability and strength of the connection.

Specifications

The MGSHV wire can have a conductor cross-section from 0.12 to 1.5 mm 2. The outer diameter of the core is from 1.3 to 3 mm, respectively. The weight of the wire, depending on the cross-section of the core - from 2.3 to 19.8 kg / km, respectively.

The length of the wire is from 50 m. The life of the wire is at least 15 years. The wire is designed to work for at least 10,000 hours.

The wire is designed to transmit both permanent and alternating current. The working voltage of the wire is from 380 V to 1000 V (depending on the conductor cross-section), at a frequency of up to 10 kHz. The constant voltage is from 500 V to 1500 V (depending on the section of the core). More detailed specifications are attached to each type of wire.

The color of the insulation can be any, both monochrome, and stripes.

Operational characteristics

Thanks to polyester insulation and PVC outer insulation, the MGSHV wire is resistant to precipitation, ultraviolet, static dust. The insulation is resistant to the effects of mineral oils, gasoline, salt water, salt fog. The wire does not mold, does not lose its characteristics when subjected to mechanical shocks, both single and multiple. MGSVV wire is resistant to linear acceleration, sinusoidal vibration and acoustic noise. Also, the insulation can withstand the temperature to +150 0 С, under the condition of short-term exposure. The operating temperature range is -50 0 С to +70 0 С. That is, the MGSHV wire can be used practically in all regions of the country. The wire is operated at a relative humidity of up to 99% (at temperatures up to +35 0 C). It is designed for use in conditions of low and high atmospheric pressure (up to 3 atm.).

MGSVV wire does not spread combustion, provided it is used singly.

Application

The wire MGSHV has wide application in various fields - in construction, production, industry, in everyday life. Wire is used for both stationary and mobile connections. The wire is used for non-block or intra-unit connections when installing electrical equipment, radio equipment. Particularly common is its use in aircraft building, shipbuilding.

Application features

MGSVV wire does not have any special features - its cleaning and installation are carried out in accordance with generally accepted rules.

It should be noted that all of the above is true for high quality wire. Poor quality or marriage make the use of the wire impossible because of its potential danger.

Here you can purchase MGSVV wire in a wide range (of different cross-sections). All products are certified - we provide a certificate of compliance for each type of wire MGSHV.

We offer wire MGSHV at an affordable price, in any quantity.

All products are certified this year.

The wire is designed for operation with an operating alternating voltage up to 380V for cross sections of 0.12;

0.14 mm² and 1000 V for cross-sections of 0.20-0.50 mm² frequency up to 10 kHz and constant voltage   up to 500 and 1500V

All products are certified this year.

The wire is designed for operation with an operating alternating voltage up to 380V for cross sections of 0.12;

0.14 mm² and 1000V for cross-sections of 0.20-0.50 mm² frequency up to 10 kHz and a constant voltage of up to 500 and 1500 V

All products are certified this year.

The wire is designed for operation with an operating alternating voltage up to 380V for cross sections of 0.12;

0.14 mm² and 1000V for cross-sections of 0.20-0.50 mm² frequency up to 10 kHz and a constant voltage of up to 500 and 1500 V

All products are certified this year.

The wire is designed for operation with an operating alternating voltage up to 380V for cross sections of 0.12;

0.14 mm² and 1000V for cross-sections of 0.20-0.50 mm² frequency up to 10 kHz and a constant voltage of up to 500 and 1500 V

All products are certified this year.

The wire is designed for operation with an operating alternating voltage up to 380V for cross sections of 0.12;

0.14 mm² and 1000V for cross-sections of 0.20-0.50 mm² frequency up to 10 kHz and a constant voltage of up to 500 and 1500 V

All products are certified this year.

The wire is designed for operation with an operating alternating voltage up to 380V for cross sections of 0.12;

0.14 mm² and 1000V for cross-sections of 0.20-0.50 mm² frequency up to 10 kHz and a constant voltage of up to 500 and 1500 V

All products are certified this year.

The wire is designed for operation with an operating alternating voltage up to 380V for cross sections of 0.12;

0.14 mm² and 1000V for cross-sections of 0.20-0.50 mm² frequency up to 10 kHz and a constant voltage of up to 500 and 1500 V

All products are certified this year.

Buy MGSHV 1 * 0.2 by the most low prices   in the company "Clive". All products are in stock in Moscow. Supplied MGSHV 1 * 0.2 has all the necessary quality certificates. We deliver all over Russia. For detailed information on the delivery of MGSV 1 * 0.2, see the section "Delivery".

Description and decoding of MGSHV 1x0,2:
M - Installation wire
D - Flexible (stranded wire)
Ш - The vein is covered with silk polyester yarns
B - PVC insulation


Elements of construction MGSHV 1х0,2:
Low-voltage installation wire with copper tin-plated conductive high-class residential flexibility class 4 or 5, combined fibrous and PVC insulation.

Operating conditions MGSHV 1x0.2:
The wire is intended for intra-block and interblock connections of electrical devices and equipment.
Type of climatic performance
The wire is resistant to vibration, shock and linear loads, as well as to acoustic noise.
The wire is designed for operation in the temperature range from minus 50 to 70 ° C.
The wire is resistant to relative humidity of air up to 98% at a temperature of up to 35 ° C, lowered to 133 micropaels (1 micrometer Hg) for 24 hours and increased to 295 kPa (3 kgf / cm2) atmospheric pressure, mold fungi, static and dynamic dust, salt fog, solar radiation, atmospheric precipitation, gasoline, mineral oil and salt water.
The wire corresponds to TU 16-505.437-82.

Specifications MGSHV 1h0.2:
The wire is available in 7 colors: white or natural, yellow or orange, red or pink, blue or blue, green brown, black or purple.
The electrical resistance of the core at a length of 1 km corresponds to GOST 22483-77.
Test lead voltage:
- sections of 0.08-0.14 mm2 with a frequency of up to 10 kHz - up to 380 V;
- sections of 0.20-1.5 mm2 with a frequency up to 10 kHz - up to 1000 V;
- sections of 0.08-0.14mm2 with a frequency of up to 50kHz - 800V;
- sections of 0.20-1.5 mm2 with a frequency of up to 50 kHz - 2000 V.
Electrical insulation resistance of 1 m wire, MOhm - not less than 20000.
The wire does not spread the combustion in a single laying.
The 95% resource is 15,000 hours.
Service life - not less than 15 years.

Wire characteristics MGSHV 1x0,2

  • Weight, kg: 3.9
  • Diameter, mm: 1.6

Want to learn about MGSHV wire 1x0.2 more?

Our technical specialists will promptly answer any questions you are interested in. Such as:

  • rated cable mass
  • outer diameter
  • construction length
  • minimum bending radius
  • resistance of insulation and conductors
  • long / maximum permissible current loads (continuous current)
  • active / inductive resistance
  • will help calculate the power of the cable (current), the rated voltage

Wire МГШВ 1х0,2 at manufacture has all necessary certificates and quality passports.

Produced according to TU 16.505.437-82.

Code OKP 358321.

Description and design of MGSV wire

MGSHV is an installation wire with a core of copper tinned wires, with fibrous insulation and PVC-plastic insulation.

Explanation of the designation:

"M" - installation;
   "D" - flexible;
   "Ш" - the first layer of insulation made of silk (currently made of polyester yarn);
   "B" - the second layer of insulation made of PVC-plastic (vinyl).

Example designation: MGSHV 0.5 - wire MGSHV with a residential section of 0.5 mm 2

The range of produced cross-sections is from 0.12 to 1.5 mm 2.

The cores must be twisted from copper tinned wires. The design of the cores and the maximum outer diameter are given in the table.


The first layer of insulation is made of polyester threads superimposed by the winding.

The wires must be made in different colors.


If there is no indication of a specific color in the order, the manufacturer delivers the wires at its own discretion, while it is allowed to supply wires with isolation of transitional and mixed colors (designation "SC").

Conditions of installation and operation of the MGSHV wire

Installation and operation are possible at temperatures from minus 50 ° C to plus 70 ° C. Does not spread the combustion in a single laying. Service life - not less than 15 years.

Technical characteristics of MGHV wire

Electrical resistance of conductors on direct current   should be no more than indicated in the table.


The electrical insulation resistance per 1 km of length should be not less than 20 MΩ at a temperature of 20 ° C and not less than 1 MΩ at a temperature of 70 ° C.

The wires must withstand an AC voltage of 50 Hz for 1 minute, a value of 800 V for wires of 0.12 and 0.14 mm 2 and 2000 V for wires of other cross sections.

The wires must be resistant to vibration loads.

Requirements for wire wrapping MGSVV

The wires must be supplied in coils. The building length must be at least 50 m. In one delivery lot, no more than 30% of wires with a length of at least 5 m are allowed.

Requirements for marking the wire MGSHV

On the label attached to the bay or coil, the following must be indicated:

A trademark of the manufacturer;
- symbol   wire (complete with indication of the section);
   - length in meters;
   - manufacturing date (year, month);
   - designation TH.

Requirements for MGHV wire storage conditions

According to the climatic conditions, the wires must be stored in enclosed spaces.

Mass-dimension parameters of the MGSHV wire

Approximate weight of wires for packing and transportation purposes are given in the table. The values ​​given can differ for wires of different parties and manufacturers by 10% on a smaller or larger side.

Available methods of wire quality monitoring MGSVB

The methods of control are given which, not being strictly consistent with the specifications, allow us to draw preliminary conclusions about the quality of the wire, if the measured values ​​are significantly different from the regulated values. The final conclusion on the conformity of the TU wire can only be made after testing the wires in a specialized laboratory using strict procedures and in the volumes specified in the specification.

Visual inspection
   Can be checked: the number of wires in the vein, the coloring and integrity of the insulation.

Measurement of structural dimensions   Can be checked using suitable measuring tools outer diameter. Measurement of the wire diameter dp and calculation of the wire cross-section according to the formula 0.785d pr 2 N (where N is the number of wires in the core) is not a strict method of monitoring the cross-section of the wires. The electrical resistance is the confirmation of the cross-section, but a significant deviation of the calculated cross-section from the nominal cross section (by more than 10%) may serve as a basis for doubt in quality.

Measuring the electrical resistance of conductors
Can be carried out by an ohmmeter with an appropriate measuring range and recalculated to a length of 1 km. Particular attention should be given to good contact with the test leads.

Support the project - share the link, thank you!
Read also
Classification by constructive scheme Classification by constructive scheme Company Elektrozhgut at your service Company Elektrozhgut at your service Water meters registration after installation Water meters registration after installation