Antipyretics for children are prescribed by a pediatrician. But there are situations of emergency care for fever, when the child needs to give the medicine immediately. Then the parents take responsibility and apply antipyretic drugs. What is allowed to give to infants? How can you bring down the temperature in older children? Which medications are the safest?
Mask cords that go around the room is quite simple. The main thing is to make a little fantasy, using improvised means and some design tricks. Then we will proceed as follows - we will analyze separately how to hide the wires from the TV, computer and even lamps on the wall!
TV and internet
Hide from the eyes of the network cable and television wires going around the room is not difficult. It is best to use a special electrical skirting board, which will go through the whole house to the bedroom or hall. If you do not want to buy a new plinth, you can gently disguise a bunch of wires, using special designer pieces, like a fence, as in the photo below:
In order not to drag the Internet cable from the entrance door to the bedroom, it is recommended to install a Wi-fi router at the entrance to the apartment (in the corridor). In this case, the connection to the network will be wireless and you will not have to pull the cable between the rooms, through the doorways and sills.
In addition, you can hide the television wires in the cable channel, which is quite simply attached to the wall by screws. To date, there are many that will fit the color, not only in an ordinary apartment, but also in a wooden house.
If the repair is already done, then the best solution will be to use the decor elements - beautiful clips that will decorate the wires from the hinged TV, going along the floor and the wall. An example of this method of solving the problem can also be seen on the photo:
If you want to hide the cords from the TV during the repair, we recommend to make for them a special niche in the drywall or vice versa, to assemble a box:
In order not to trowel the walls, you can hide the TV and Internet cable in the baseboard, if you make it as shown in this video:
How to carefully remove the cable?
Well, the last way is to grasp the groove behind the plasma in the wall and let the electric wires run through it. However, this is the most time-consuming option, which should be avoided. Imagine that the TV needs to be hung on another wall, you'll have to think again how to hide the antenna cable.
As for the rest of home appliances - air conditioner, music center or even a home theater, with the help of the above ideas you can disguise the hanging wires using the same technique. The cable from the air conditioner is most often hidden in the cable channel, and from the home theater, the wires are allowed over the plinth, fixed with special clips.
A computer
Computer wires very much spoil the interior of the room and if a little fantasy, you can hide them pretty beautiful.
The first idea is to disguise all the cords from the monitor, the system unit and the modem under the table top, fixing them with clips using self-tapping screws or double-sided scotch tape. This idea was clearly shown in the photo example:
Another simple way to hide all the unnecessary under the cover of the table you can see in this video tutorial:
Do not want to spoil the table? You can hide the wires from computer equipment in the box from under the shoes, originally decorating it under the bedroom interior.
How to make such a box with your own hands, you can find out by watching this video:
What can a shoe box be useful for?
In addition, the original idea is the purchase of a special cover for the extension cord, which is quite simply attached to the cover of the desk.
If you are hampered by the cord from the speakers, it can easily be hidden in the appropriate cover, which is attached to the back of the table.
All unnecessary cords, including charging, can be beautifully removed from the table, using ordinary clips, as in the picture below:
Another idea is to pass the whole bunch of wires through the hose. In this case, the chaos under the table will hide in one single shell, which will not spoil the interior of the room or even the office.
Using all these tips, you can disguise the electrical wires and make the workplace more accurate. Nothing difficult is to just put the cords and cables in a box or fasten under the table! In addition to the fact that you in this way will put things in order on the computer desk, so also camouflage allows you to protect cords from dogs and cats who like to gnaw charging, headphones, etc.
Fixtures
To date, more and more popularity is gaining the installation of spotlights in the house or apartment. As a rule, there are more than 4 spots on the ceiling, therefore there are a lot of wires for connecting them. To hide excess from the eye can be in several ways, depending on what the ceiling is in the room. The easiest way is if the ceiling is tensioned, because in this case, you can disguise the wires with the most ceiling film. If the ceiling is drywall, you can hide the wiring only under the sheets of GKL, inside the frame.
If all the wiring from the chandelier is hidden in the lamp housing, then the cord for hiding is a little more complicated. If the wall is bare, you can decoratively hide the hanging wire by building it and making a picture on the wall. An example of such an idea can be seen on the photo:
If you are thinking about how to hide the wires from the wall during the repair, it is best to connect the lamp from the junction box, and not through the outlet. In this case, all the electrical wiring will hide under the plaster and wallpaper, and the interior will not be spoiled. Do you want to do without strobleniya? Then hide all the extra channels in the cable that go along the wall.
Hide the power supply from the LED strip can be in a special box, which is attached under the ceiling and allows in the kitchen or in the hall.
How to remove excess cords from the "company"?
Like( 0 ) I do not like( 0 )
Many seek to immediately hide the wires, for example, under a carpet, behind furniture or behind skirting boards. But this is not the only way to disguise them. If you want and the availability of free time, you can create from the electric cable a whole picture. To do this, you need wiring brackets. With their help, it's easy to attach the wire to the wall. This method will not only solve the problem with the masking of the cable, but also help to decorate an empty uneven wall.
Colored wires
If the wire is highlighted in the color plan, then it can be used as an accent. It is necessary to make only a few curls on the wall, in this case it is not necessary to invent highly artistic subjects. To wire harmoniously blended into the space it is necessary to pick up a few accessories to it. In the kitchen, these can be plates or cups, in the living room - a vase, and in the bedroom - a decorative pillow.
As easy as pie
If there is no desire to invent something, and the wire annoys with its presence, then vinyl stickers will come to the rescue, which are easily attached to the wall. The plot should be chosen based on the style of the interior and artistic preferences.Extension with chargers constantly interferes on the table or under your feet, collects a bunch of dust, and looks unaesthetic. Cope with this problem is very simple: take a cute box, do a few holes in it and hide all the wires and cables there.
There are also ready-made solutions, for example Plug Hub from the company Quirky. This is a box made of rigid plastic with a rubberized bottom. On the top there are three cable holes, and inside - three fasteners, on which you can rewind too long cords. Plug Hub can be put on the floor or fixed to the wall.
amazon.com 2. Fasten the wires under the table top
To fix the wires and the extension under the table, you will need binders and screws (they must be at least a quarter the thickness of the table top, otherwise they will go through and the table will be spoiled). First of all, attach an extension cord under the table top, preferably in the middle of the table or closer to the wall. Then, in the right places, secure the binders with screws. Connect to the extension cord everything you need and collect the wires with clamps. Visually the table has become much cleaner and tidier.
There is a simpler option, if you do not need to hide a large number of wires. This requires a construction stapler. To keep the long wire from the lamp from hanging under your feet, carefully fasten it with clips at the table leg. A small extension cord can also be secured with paper clips. For wires it is better to use special clips (for example, such).
Staples do not suit you? Suitable ordinary ties. With ties, secure the wire at the table leg. Wires that go along the floor can be covered with plastic or a plank to match the color of the floor. Extension can be fastened under the table top with a wide Velcro: fix it on the back of the tabletop with screws, and then attach the extension cord. To ensure that the wires do not hang under the table, pass them through the cable channels - they can be purchased at any construction store. You can fix the channels themselves with an electrical tape or a conventional plaster.
3. Organize cable storage
To get rid of the confusion in the wires will help their correct organization. First, gather around the house cords from phones, player, game console, tablets. Then take the boxes (preferably nicer), place the dividers inside the cardboard inside them, sign the space for each cable (so that you do not get confused) and put everything neatly. In order not to entangle the wires themselves, use conventional ties.
If you do not want to mess around with boxes, buy a basket and store more bushings from toilet paper.
If the wires do not interfere with you, you can simply attach a label to each of them to make it easier to distinguish them. For example, this:
4. Keep all the necessary wires handy
Not all cables can be hidden in a box: some of them are needed almost constantly. The solution is simple: fasten them to the edge of the desktop so that if necessary, you can reach out and connect the device to the correct wire. In this we will help Sugru - plasticine rubber and one of the most indispensable things in the farm. Do not believe me? Then look.
Roll small balls from Sugru, fasten it to the table support. Then remove the clay with a clerical knife (carefully, try not to deform the balls very much). Layfak: so that the clay does not stick to the blade, rinse it with soapy water beforehand. Then adjust the shape a little with a sushi stick or toothpick to get neat troughs (they should be slightly wider than your wires). Everything is ready, you can fix the cables.
Quite often owners of their own homes think about the question of how to hide wires from different equipment. If they "flaunt" outside, then the aesthetics of the interior will not add. To cope with such works you will be able to do it yourself, for this you will only need to prepare some tools and show imagination. Manipulation will not take long.
Decoration of wires from the TV
In some apartments and houses quite often you can see a picture when from the technician by the type of the TV go whole strings of cables and wires. However, they can be hidden in the wall, given some rules. Among them, it should be noted:
- electric wires must not have insulation faults;
- it is better to place the wires as far as possible from microwaves, refrigerators, washing machines and irons;
- it is important to avoid moisture and condensation on the cables.
If before you, too, the question arose of how to hide the wires, then it is best to place them in the cable channel, where low-current lines pass by the type of Internet, alarm and telephone wire. The layout of the apartment must be done in one piece. Intersections are unacceptable, and during installation work, splitters and signal splitters of factory production should be used. Wire twisting should not be, since they will not be able to create good screening, which will negatively affect the signal quality.
A modern solution: the use of a box
Before you hide the wires, you should consider several solutions to this issue, among which the use of decorative boxes should be highlighted. They can be made of metal, plastic or combined materials. This device not only looks pretty simple, but it also meets the fire regulations.
There are also disadvantages to this solution, they consist in the high cost of products, the need for skills of the master, as well as the lack of recommendations for installation.
If you still do not know how to hide the wires, then do not buy the first box or cable-channel that suits you in appearance and cost. It is important to pay attention to the accessories, namely:
- plugs;
- transitions for angles;
- tees;
- peak elements.
This will not only simplify the installation, but will also give the appearance of the box an attractive appearance.
Cabling in the wall
Quite often novice home masters are wondering if they are paving them in a stroba, it will become the most invisible and reliable way. Gypsum boards are sometimes used as an alternative solution, but their installation requires time and skills. It is best to use the method of shtrobleniya, but you can only resort to it if the cable laying is accompanied by repair.
Use of plasterboard sheets for decorating wires
Before you hide the wires from the TV on the wall, you can consider several options for solving this issue. As one of them are gypsum boards. For work it will be necessary to prepare:
- wire;
- insulating tape;
- strong rope or string;
- nut of small diameter.
The order of work
At the first stage, the bracket for installing the TV must be secured to the wall. Angles of the location of the household appliance are marked with an insulating tape. In the process of work this will exclude the possibility that you will go beyond the zone that is hidden behind the TV. 
Next, mark the location of the outlet for connecting the TV. All available cables are lowered, and on the plasterboard markings are made for the holes. The area should be marked as accurately as possible, this will fit into the hole without any gaps.
Before you hide the wires beautifully, on the wall you have to make cable channels, through which cables will be output. In the lower part of the wall a second hole is made, through which the cable hides in the plinth. The outlet can be installed behind the TV, but it should be easily accessible.
How to hide wires in a cable channel on the floor
The floor cable channel is also great for decorating wires. To do this, you can use a variety of fasteners, as the most common advocates samorez. Once the wires have been laid inside, you can proceed to fix the cable duct.
The distance between the screws will depend on the load on the plastic box. When working with plasterboard or a wooden wall, where the cable channel will be fixed, the screws are installed every 50 cm. With uneven walls, the fixing step is reduced, which makes it possible to hide gaps and defects. The cable must not be fixed with a long self-tapping screw. For reliable fixing, 40 mm fasteners will suffice. For screwing it is recommended to use a screwdriver with a cross bit.
Decoration of wires in a cable channel by means of dowels-nails
If the cable channel is to be reinforced to a brick or concrete wall, which is quite common for modern houses and apartments, in this case, there is no way to do without the cable channel and dowel-nails, which are also called fast erection. To perform the work you will need a perforator with a 6 mm drill.
To independently fix the cable ducts on the wall of brick and concrete, a number of the following operations must be performed. 6 mm holes are drilled in the bottom of the cable channel, the distance between them is 50 cm. The box is attached to the wall by marking, which will mark the points of attachment that coincide with the holes in the cable channel. The holes must be drilled, only after the box can be installed in its place. Using a hammer, the nails are clogged.
Using "bugs" to install a cable channel
If it is necessary to mount the cable duct into a metal surface that is 2 mm or less thick, metal screws, also called bugs, should be used for fixing. On sale, you can find a special gun, through which the cable channel is installed on concrete.
Original ideas for home: how to make wires from the computer invisible
You, too, can try to solve the problem of how to hide the wires from the computer. There are several modern solutions for this. The first idea is to disguise the cords under the table top. To do this, clips are used, mounted on self-tapping screws or reinforced with double-sided tape.
If you do not want to spoil the table at all, then you can hide the wires in a usual box from under the shoes, but you can decorate it beforehand by making a design that is close to the interior of the room. If you are wondering how to decoratively hide the wires, then for this purpose you can buy a special decorative cover, which hides the extension cord. It can be attached to the cover of the desk.
When the cord from the speakers interferes, it is usually hidden in such a case, which is fixed to the back side of the table. Excess cords and charging can be removed using ordinary stationery Another original idea is to conduct the wires through the hose. This often helps to solve the problem of how to hide wires under the table in one shell, which will not spoil the interior so much.
Conclusion
Workplace using one of the above described methods can be made more accurate and aesthetic. In this there is nothing complicated, the cords can simply be placed in a box or fastened under a table. An additional advantage is that the cords will be reliably protected from children, as well as pets.
Each person constantly improves his apartment: he changes furniture, repairs and equips with modern equipment, the work of which is simply impossible without electricity. The more equipment in your apartment, the more you and the wires, even with the fact that today a huge number of devices work on wireless connections. Hiding multiple cables is sometimes not easy, but simply impossible. What can be done with this and how to get rid of all these wires?
The easiest way to get rid of wires is to hide them in the floorboards. The peculiarity of this skirting board is that it contains a cavity specially designed for laying wires. You can buy it on the market or in a special store. Such a plinth is fixed to the wall using dowels and screws. Wires running along the wall, hide in special boxes. Decorative boxes come in different shapes and colors, they also differ in size. The variety of choices allows you to choose the optimal size box, which allows you to lay all the wires in it and not be too bulky at the same time. After laying wires the niche of the box is covered with a decorative plastic strip and reliably hides the wires not only from human eyes, but also from pets, thereby providing them with reliable protection against damage.
As can be seen, today there is no problem to hide or disguise the wires laid over the apartment. Of the numerous ways, everyone can choose the optimal one, which will achieve the desired result at the lowest cost.
